Honda CBR1000RR Owner's Manual page 42

!c Press SET button. The blinking RPM is set,
and then the display moves to the setting of
lighting interval RPM.
At the same time, the blinking bar segment
shows the currently applied setting
originated from the blinking RPM and the
numerical tachometer display shows the
interval RPM.
!d Each time SEL button is pressed, the
number of lighting interval RPM is switched
among 0 r/min (rpm), 200 r/min (rpm) and
400 r/min (rpm) in this order. During this
setting, the REV indicators light one by one
from left and when all indicators light, they
go out, and then they start to light from left
again.
0 200
Tachometer
Numerical tachometer
display
400
39