RedMax GZ4000 Owner's/Operator's Manual page 12

GZ4000
8. Operation
properly or in the engine failing to
operate at its normal speed, and for
this reason you should always be sure
to return the unit to normal operating
mode if there is no danger of icing
occurring.
■ HOW TO SWITCH BETWEEN
OPERATING MODES (F19)
1. Flip the engine switch to turn off the
engine.
2. Remove the cover to the air filter,
F19
remove the air filter, and then remove
the choke knob from the cylinder
cover.
3. Loosen the screws holding the cylinder
cover in place (i.e., the three screws on
the inside and the one screw on the
outside of the cover), and then remove
the cylinder cover.
4. Press with your finger down on the
icing cap located on the right-hand side
of the cylinder cover to remove the
icing cap.
5. Adjust the icing cap so that the "snow"
mark faces upwards and then return it
to its original position in the cylinder
cover.
6. Fix the cylinder cover back into its
original position, and then fix all other
parts back into their proper positions.
(1) Choke knob
(2) Cylinder cover
(3) Icing cap
US-12