Sony HCD-GN100D Service Manual page 19

QQ
3 7 63 1515 0
[VACS ON/OFF]
• This mode is used to switch ON and OFF the VACS (Variable
Attenuation Control System).
Procedure:
1. Press button to turn the set ON.
?/1
2. Press [ENTER] button and [GAME MIXING] button simultaneously.
The message "VACS OFF" or "VACS ON" appears on the
fluorescent indicator tube.
[TUNER STEP CHANGE]
• The step interval of AM channels can be toggled between 9 kHz
and 10 kHz.
Procedure:
1. Press button to turn the set ON.
?/1
2. Press [TUNER/BAND] button to select the "AM".
3. Press button to turn the set OFF.
?/1
4. Press [ENTER] button and
will power ON automatically. The message "AM 9k STEP" or
"AM 10k STEP" appears on the fluorescent indicator tube and
thus the channel step is changed.
[REPEAT 5 LIMIT OFF MODE]
• The number of repeat for disc playback is 5 times when the
repeat mode is "REPEAT ALL". This mode enables the disc to
repeat playback for limitless times.
Procedure:
1. Press button to turn the set ON.
?/1
TE
L 13942296513
2. Select DVD function.
3. Press button, [EQ EDIT] button and [DVD] button
x
simultaneously to enter the repeat 5 limit off mode and the
fluorescent indicator tube displays "LIMIT OFF".
• To release from this mode, operate the cold reset. (Refer to the
"MC COLD RESET")
[DVD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the
RAM to initial conditions. Use this mode when returning the
set to the customer after repair.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
button, [ENTER] button and [GAME] button
3. Press
x
simultaneously. The set will power off automatically.
4. After the "STANDBY" blinking display finish, a message
"LOCK" is displayed on the fluorescent indicator tube and the
DVD ship mode is set.
[DVD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration.
Procedure:
www
1. Press button to turn the set ON.
?/1
2. Select DVD function.
3. Press [DVD] button and [POWER] button simultaneously. The
set will power off automatically.
.
4. After the "STANDBY" blinking display finish, a message
"LOCK" is displayed on the fluorescent indicator tube and the
DVD ship mode is set.
http://www.xiaoyu163.com
button simultaneously. The set
?/1
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
[DVD POWER MANAGE]
• This mode let you switch on or off power supply to the ZIVA
during TUNER function.
• When DVD POWER is set to OFF, the power supply to the ZIVA
is cut off during TUNER function. It will increase the time taken
to access disc when function change from TUNER to DVD but it
will improve tuner reception performance.
• When DVD POWER is set to ON, the power supply to the ZIVA
is not cut off during TUNER function. It will reduce the time
taken to access disc when function change from TUNER to DVD
but it will decrease tuner reception performance.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
3. Press button to turn the set OFF.
?/1
4. Press button and
x
power on automatically.
5. The message "DVD POWER ON" or "DVD POWER OFF"
will be displayed on the fluorescent indicator tube.
[DVD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is
activated, the disc tray will not open when [OPEN/CLOSE]
button or [EX-CHANGE/DISC SKIP] button is pressed. The
message "LOCKED" will be displayed in on the fluorescent
indicator tube.
Q Q
3 6 7 1 3 1 5
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
button and [OPEN/CLOSE] button simultaneously
3. Press
x
and hold down until "LOCKED" or "UNLOCKED" displayed
on the fluorescent indicator tube (around 5 seconds).
[VIDEO/SAT SWITCHING]
• This mode let you switch from VIDEO to SAT and vice-versa.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select VIDEO function.
3. Press [VIDEO/SAT] button and
function will change to SAT. Press the same buttons again to
change from SAT to VIDEO.
[DVD COLOR SYSTEM SWITCHING]
• This mode let you change the color system of the video output
from PAL to NTSC or vice-versa.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select DVD function.
3. Press button to turn the set OFF.
?/1
4. Press [PAUSE] button and
will power on automatically.
5. The message "COLOR PAL" or "COLOR NTSC" will be
displayed on the fluorescent indicator tube.
co
.
HCD-GN90D/GN100D
9 4 2 8
button simultaneously. The set will
?/1
0 5 8 2 9 9 4 2 8
button simultaneously. The
?/1
button simultaneously. The set
?/1
m
9 9
9 9
19