Vwf30Spa Log Placement - Monessen Hearth VWF18 Installation And Operating Instructions Manual

MODEL VWF30SPA (8 LOGS)
#9
#6
#3
#2
#1A
Optional
Accessory Cover
Figure 26 - VWF30SPA (Split River Oak)
Log Placement
27D8520
NOTE: Each log may have an identifying number on
bottom surface.
#8
1. Slide shield plate down back of burner pan. See Figure 26.
#7
2. Place Left Front Log #1A on front left of grate. Place Right Front
Log #1B on front right of the grate. See Figure 26.
3. Place front end of Side Support Log #2 on top left of Log #1. Rest
other end of Log #2 on rear grate bar. See Figure 26.
4. Fit cutout in the bottom left of Rear Log #3 over the back end of
log #2. Rest right end of Log #3 on rear grate bar. See Figure 26.
#5
5. Rest front end of Right Log #4 on right top of Log #1. The back
end of Log #4 rests to right hump on Log #3. See Figure 26.
6. Place front of Right Middle Log #5 on top right of Log #4. Rest
back end of Log #5 on top right of Log #3. See Figure 26.
7. Rest front of Left Log #6 just left of the middle of Log #1 and back
end of Log #6 just left of middle of Log #3. See Figure 26.
#4
8. Lay Top Center Log #7 across log #5 with front end resting on Log
#1. See Figure 26.
9. Place front end of Top Left Log #8 on Log #7. Let back end of Log
#8 rest on Log #6. See Figure 26.
10. Rest front of Top Top Log #9 on Log #6 and back of Log #9 on left
end of Log #2. See Figure 26.
#1B
Shield
Plate
Figure 27 - VWF30SPA (Split River Oak)
LOG PLACEMENT
Log Placement
19