Heat & Glo SL-550TR-E Owner's Manual page 63

FINISHING MATERIAL
4 IN. MAXIMUM
THICKNESS
(Includes 1/8 in. opening each side of door)
Finishing material between 1 and 4 inches thick.
Refer to Table 1 for X and Y dimensions.
Figure 13.22 Inside Fit Door (Chad)
FINISHING
MATERIAL
*IF FINISHING MATERIAL IS THICKER THAN
2 IN., DOORS WILL ONLY OPEN
AS FAR AS PICTURED
X
(Includes 1/8 in. opening each side of door)
Finishing material between 1 and 4 inches thick.
Refer to Table 1 for X and Y dimensions.
Figure 13.23 Operable Hinge Door (Halston)
FINISHING MATERIAL
4 IN. MAXIMUM
THICKNESS
DOOR
Y
X
FINISHING
MATERIAL
DOORS
Y
Heat & Glo • SL-550 / 750 / 950TR-E • 2118-900 Rev. U • 7/12 63