Chapter 1 Overview Of The Router - Cisco 2900 Series Installation Manual

Cisco 2900 and 3900 series hardware
Hide thumbs Also See for 2900 Series:
Table of Contents

Advertisement

Chapter 1
Overview of the Routers
2. Activity
3. POE = power over Ethernet.
4. LED goes off if the AC power fails or is disconnected. It does not go on and off with the power switch.
Figure 1-2
Back Panel Slots and Connectors of the Cisco 2901 Router
EHWIC 3
DO NOT REMOVE DURING
CF 1
NETWORKING OPERATION
9
1
3
5
7
9
1. DW-EHWICs can fit into slot 0 and 1, and into slot 2 and 3. EHWIC slots support HWIC, VIC, and WIC.
2. USB = Universal serial bus
3. Only Advanced Capability CompactFlash (CF) purchased from Cisco operates in Cisco 2900 series and Cisco 3900 series
1
EHWIC 2
DO NOT REMOVE DURING
PVDM1
CF 0
ISM
NETWORKING OPERATION
9
1
EHWIC slots
0, 1, 2, and 3 (0, Far right)
Aux port
10/100/1000 Ethernet ports (GE0/1)
Ground
3
CompactFlash
0 and 1
ISRs. Legacy CF can impact and severely degrade performance in these routers. See the
When legacy CF is inserted, the following error message appears:
WARNING: Unsupported compact flash detected. Use of this card during normal operation
can impact and severely degrade performance of the system. Please use supported
compact flash cards only.
EHWIC 1
EHWIC 0
PVDM0
2
USB
4
RJ-45 serial console port
6
10/100/1000 Ethernet port (GE0/0)
8
USB0 and USB1 (1, Top)
Cisco 2900 Series and 3900 Series Hardware Installation Guide
2
3
4
5
S
AUX
G
E
0
/
0
GE 0/1
1
USB
EN
EN
0
CONSOLE
S
L
2
serial port
"Memory" section on page
Chassis Views
6
L
2901
8
7
1-22.
1-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3900 series

Table of Contents