Cisco 2900 Series Installation Manual page 143

Chapter 4 Configuring the Router
Command or Action
Step 4
ip route dest-prefix mask next-hop-ip-address
[admin-distance] [permanent]
Example:
Router(config)# ip route 192.168.24.0
255.255.255.0 172.28.99.2
Step 5
ip default-network network-number
or
ip route dest-prefix mask next-hop-ip-address
Example:
Router(config)# ip default-network 192.168.24.0
Example:
Router(config)# ip route 0.0.0.0 0.0.0.0
172.28.99.1
Step 6
end
Example:
Router(config)# end
Step 7
show ip route
Example:
Router# show ip route
Examples
Specifying a Default Route: Example
!
ip routing
!
ip route 192.168.24.0 255.255.255.0 172.28.99.2
!
ip default-network 192.168.24.0
!
Sample Output for the show ip route Command
Router# show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
Gateway of last resort is 172.28.99.2 to network 192.168.24.0
C
S
S*
C
Router#
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default
172.24.0.0 255.255.255.0 is subnetted, 1 subnets
172.24.192.0 is directly connected, FastEthernet0
172.24.0.0 255.255.0.0 [1/0] via 172.28.99.0
192.168.24.0 [1/0] via 172.28.99.2
172.16.0.0 255.255.255.0 is subnetted, 1 subnets
172.16.99.0 is directly connected, FastEthernet1
Performing the Initial Configuration on the Router
Purpose
Establishes a static route.
Selects a network as a candidate route for computing the
gateway of last resort.
Creates a static route to network 0.0.0.0 0.0.0.0 for
computing the gateway of last resort.
Returns to privileged EXEC mode.
Displays the current routing table information.
Verify that the gateway of last resort is set.
•
Cisco 2900 and 3900 Series Hardware Installation
4-17