Cisco 2900 Series Installation Manual page 146

Performing the Initial Configuration on the Router
Configuring a Modem on the AUX Port for EXEC Dialin Connectivity, tech note
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
Configuring Dialout Using a Modem on the AUX Port, sample configuration
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080094579
.shtml
Configuring AUX-to-AUX Port Async Backup with Dialer Watch, sample configuration
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093d2b.
shtml
Modem-Router Connection Guide, tech note
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009428b.shtml
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
line aux 0
Example:
Router(config)# line aux 0
Step 4 See the tech notes and sample configurations to
configure the line for your particular implementation
of the AUX port.
Cisco 2900 and 3900 Series Hardware Installation
4-20
enable
configure terminal
line aux 0
See the tech notes and sample configurations to configure the line for your particular
implementation of the AUX port.
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Starts the line configuration command collection mode for
the auxiliary line.
—
Chapter 4 Configuring the Router