Connection Procedures And Precautions - Cisco 2900 Series Installation Manual

Connecting WAN, LAN, and Voice Interfaces
1. Cable color codes are specific to Cisco cables.
2. See the Cisco Modular Access Router Cable Specifications

Connection Procedures and Precautions

•
•
•
•
•
For cable pinouts, see
Cisco 2900 and 3900 Series Hardware Installation
3-44
document for information about choosing these cables.
Connect each WAN, LAN, and voice cable to the appropriate connector on the chassis or on a
network module or interface card.
Position the cables carefully, so that they do not put strain on the connectors.
Organize cables in bundles so that cables do not intertwine.
Inspect the cables to make sure that the routing and bend radius is satisfactory. Reposition cables, if
necessary.
Install cable ties in accordance with site requirements.
Cisco Modular Access Router Cable
Chapter 3 Installing and Connecting the Router
Specifications.