Fiat 2015 500 Abarth Owner's Manual page 195

By pushing the or
change progressively. By pushing them down longer,
the levels will change quickly.
Select the value "0" to set the right and left audio outputs
at the same level.
Fader Adjustment
Proceed as follows:
1. Push the AUDIO button.
2. Push the or button to set "Fader" in the
AUDIO menu.
3. Push the button to increase the sound coming
from the rear speakers or the
the sound coming from the front speakers.
By pushing the or
change progressively. By pushing them down longer,
the levels will change quickly.
buttons briefly, the levels will
button to increase
buttons briefly, the levels will
UNDERSTANDING YOUR INSTRUMENT PANEL 193
Select the value "0" to set the right and left audio outputs
at the same level.
Loudness Function — If Equipped
The Loudness function improves the volume of the
sound while listening at low volumes, increasing the bass
and treble.
To activate/deactivate this function, select the "Loud-
ness" setting in the AUDIO menu. The condition of the
function (on or off) is shown on the display for a few
seconds by the wording "Loudness On" or "Loudness
Off".
Preset/User/Classic/Rock/Jazz Functions — If
Equipped
The built-in equalizer can be activated/deactivated.
When the equalizer function is off, the audio settings can
only be changed by adjusting the "Bass" and "Treble"
settings, whereas when the function is on, the acoustic
I n f o r ma t i o n P r o v i d e d b y :
4