Fiat 2015 500 Abarth Owner's Manual page 182

180 UNDERSTANDING YOUR INSTRUMENT PANEL
Hill Start Assist
This function is used when starting a vehicle from a stop
on a hill. Hill Start Assist maintains the same level of
brake pressure the driver applied for a short period of
time after the foot has been removed from the brake
pedal.
Proceed as follows to switch this function on or off:
1. Briefly push and release the MENU button. Push and
release the UP or DOWN
the Hill Start Assist. Push and release the MENU
button to enter the Hill Start Assist MENU.
2. Push and release the UP
setting.
3. Briefly push and release the MENU button to go back
to the menu screen, or push and hold the button
(approximately one second) to go back to the main
screen without storing the settings.
button to highlight
or DOWN button for
I n f o r ma t i o n P r o v i d e d b y :
Tire Pressure
This function will be used to display the tire pressures
individually for all four tires by location.
Proceed as follows:
1. Briefly push and release the MENU button. Push and
release the UP or DOWN
the Tire Pressure. Push and release the MENU
button to enter the Tire Pressure MENU.
2. Push and release the UP or DOWN button to scroll
through all four tire pressure value locations.
3. Briefly push and release the MENU button to go back
to the menu screen, or push and hold the button
(approximately one second) to go back to the main
screen.
button to highlight