Kodak EasyShare 5500 User Manual page 131

Message
Proofsheet no longer valid.
Print a new proofsheet, select
pictures, and place it on the
scanner glass.
Load plain paper for duplexing.
Message
Printhead missing or not
installed correctly.
Printer requires calibration.
Calibration unsuccessful
Cannot read calibration sheet.
Some photos may not be visible.
Maximum number of photos
exceeded.
Ink overflow container is full.
Printer error. Print job
unsuccessful.
There was an error reading the
tagged pictures on your input
device.
User's Guide
Paper Messages
Cause
The device used to print the
proofsheet was removed. A new
session number is assigned
each time a Proofsheet is
printed. When the printer scans
the Proofsheet it must match the
current session number.
Wrong paper type for duplexing
loaded.
Print Messages
Cause
The printer has detected that a
Printhead is not installed.
The printer has detected that you
have installed a new Printhead
and now it must be calibrated.
Calibration sheet not inserted
correctly.
The printer detected a calibration
sheet, but can not read it.
A device was attached that
contained more than the
supported maximum of 1000
images. Memory Card or PTP
Camera, USB Thumbdrive.
The printer failed to finish
printing a swath successfully.
There is a DPOF file on the card
which the user has requested to
be used but the file is unusable.
Cannot read the file, formatting
of the data is not readable, file
could be corrupt.
Action/Solution
Print a new proofsheet.
Load plain paper in the main
tray.
Action/Solution
Install the printhead.
Press Start to continue.
Check calibration sheet
placement and press OK to
continue.
Press the OK button on the
printer.
None.
Press the OK button to continue.
Press the OK button on the
printer.
None.
Support
127