Sony DVP-NC600 Operating Instructions Manual page 68

xDOLBY DIGITAL
Selects the Dolby Digital signals output via
the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
D-PCM
DOLBY
DIGITAL
68
Downloaded From Disc-Player.com Sony Manuals
Select this when the player is
connected to an audio component
lacking a built-in Dolby Digital
decoder. You can select whether
the signals conform to Dolby
Surround (Pro Logic) or not by
making adjustments to the
"DOWNMIX" item in "AUDIO
SETUP" (page 67).
Select this when the player is
connected to an audio component
with a built-in Dolby Digital
decoder.
If the player is connected to an
audio component lacking a built-in
Dolby Digital decoder, do not set
this. Otherwise, when you play the
Dolby Digital sound track, a loud
noise (or no sound) will come out
from the speakers, affecting your
ears or causing the speakers to be
damaged.
xDTS
Selects if DTS signals are output via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack.
OFF Select this when the player is connected
to an audio component lacking a built-in
DTS decoder. Note, however, that the
DTS signals contained in a CD are
output even if "OFF" is selected.
ON
Select this when the player is connected
to an audio component having a built-in
DTS decoder.
If the player is connected to an audio
component lacking a built-in DTS
decoder, do not set this. Otherwise,
when you play the DTS sound track, a
loud noise (or no sound) will come out
from the speakers, affecting your ears or
causing the speakers to be damaged.
Note
If you select one of the TVS settings while playing a
DVD, the player does not output the Dolby Digital
signals from the DIGITAL OUT (COAXIAL or
OPTICAL) jack (when you set "DOLBY DIGITAL"
in "AUDIO SETUP" to "D-PCM").