Resuming Playback From The Point Where You Stopped The Disc; (Resume Play) - Sony DVP-NC600 Operating Instructions Manual

4
Replace the discs in the compartments
with new ones.
5
Press EXCHANGE.
The disc tray closes.
z
While the disc tray is open,
– If the playback of the current disc ends, the player
stops playing. If the disc is played in ONE DISC
Repeat Play mode, the current disc starts playing
again.
– In ALL DISCS Shuffle Play mode (page 41),
titles/tracks/chapters are reshuffled only on the
current disc.
– In Program Play mode (page 39), the titles/tracks/
chapters only on the current disc are played.
Note
Do not push the disc tray to close in Step 5, as you may
damage the player.
Downloaded From Disc-Player.com Sony Manuals
Resuming Playback from
the Point Where You
Stopped the Disc
Play)
When you stop the disc, the player
remembers the point where you pressed x
and "RESUME" appears on the front panel
display. As long as you do not open the disc
tray, Resume Play works even if the player
enters standby mode by pressing ?/1 on the
remote.
1 2
4 5
7 8
0
H
1
While playing a disc, press x to
stop playback.
"RESUME" appears on the front panel
display and you can restart the disc from
the point where you stopped the disc.
If "RESUME" does not appear, Resume
Play is not available.
2
Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z
To play from the beginning of the disc, press x
twice, then press H.
(Resume
3
6
9
x
35