Sony DVP-NC600 Operating Instructions Manual page 24

Cd/dvd player

Hide thumbs Also See for DVP-NC600:

Table of Contents

Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and

3 to 6 speakers

This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your

amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or

DTS decoder, refer to page 26.

You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or

multichannel audio (Dolby Digital) discs.

Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround

effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.

If your amplifier (receiver) has R and L audio input jacks only, use

. If your amplifier

C-1

(receiver) has a digital input jack, use

C-2

xRecommended surround sound effects using this connection with your amplifier (receiver).

• Dolby Surround (Pro Logic) (page 66)

For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).

Downloaded From Disc-Player.com Sony Manuals

Table of Contents