Operation Sound Effects (Sound Feedback) - Sony DVP-NC600 Operating Instructions Manual

Operation Sound Effects
(Sound Feedback)
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
Operation
Power is turned on
Power is turned off
H is pressed
X is pressed
Playback is stopped
Operation is not possible
Downloaded From Disc-Player.com Sony Manuals
Operation
sound
One beep
Two beeps
One beep
Two beeps
One long beep
Three beeps
To set Sound Feedback
Power indicator
POWER
1 2 3
4 5 6
7 8 9
0
1
Press POWER on the player, then press
?/1 on the remote.
The power indicator lights up in green.
When there is a disc in the player, press
A and remove the disc. Then press A
again to close the disc tray.
2
Press and hold X on the player for more
than two seconds.
You will hear one beep and the Sound
Feedback function is turned on.
To turn off the Sound Feedback
function
When there is no disc in the player, press and
hold X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
A
X
?/1
59