Functions In Diag Mode; Initial Settings Used To Start Diag - Yamaha RX-V559 Service Manual

RX-V559/HTR-5950/DSP-AX559
DIAG menu selection
Reverse
Reverse

• Functions in DIAG mode

In addition to the DIAG menu items, functions as listed
below are available.
• Input selection
• Center/Rear/Rear Center/Sub-woofer level adjustment
• Speaker relay control of A and B
• Muting
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not
available.
* It is possible to confirm Menu No.16 IF STATUS while
keeping the signal process (operation status) of each
DIAG menu by using the INPUT MODE key of the main
unit.

• Initial settings used to start DIAG

The following settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to
those before starting DIAG.
• Master volume: -20 dB
• Input: DVD (MULTI CH INPUT OFF)
• Effect level: 0 dB
• Audio mute: OFF
• Speaker relay of A and B: ON
• Speaker setting: LARGE / BASS OUT = SWFR
• DIAG menu: BYPASS (1. ANALOG BYPASS)
22
Keys of main unit /
Reverse
U, C models
Forward
RX-V559/DSP-AX559 models
Forward
Reverse Forward
U, C models
HTR-5950 model
SUB-MENU selection
Forward Reverse
R, T, K, A, G, E, L, J models
Reverse Forward
T, A models
Forward