Disassembly Procedures; Removal Of Top Cover; Removal Of Front Panel Unit; Removal Of Plate Side - Yamaha RX-V559 Service Manual

RX-V559/HTR-5950/DSP-AX559
RX-V559/DSP-AX559
I DISASSEMBLY PROCEDURES /
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.

1. Removal of Top Cover

a. Remove 4 screws (1), 5 screws (2) and 1 screw (3).
(Fig. 1)
b. Slide the Top Cover rearward to remove it. (Fig. 1)

2. Removal of Front Panel Unit

a. Remove 2 Knobs. (Fig. 1)
b. Remove 1 screw (4) and then remove the Support Top.
(Fig. 1)
c. Remove 6 screws (5). (Fig. 1)
d. Remove the Front Panel Unit. (Fig. 1)

3. Removal of Plate Side

a. Remove 2 push rivets (6). (Fig. 1)
b. Remove the Plate Side L/R. (Fig. 1)
4. Removal of Sub Chassis Unit
a. Remove 2 screws (7) and then slide the Sub Chassis
Unit forward. (Fig. 1)
b. Remove a push rivet (8). (Fig. 1)
c. Remove the Barrier/FFC. (Fig. 1)
d. Remove CB5, CB203, CB205 and CB312. (Fig. 1)
e. Remove the Sub Chassis Unit. (Fig. 1)
Plate Side L
Support Top
4
5
5
Knob
14
6
Barrier / FFC
CB312
7
7
Front Panel Unit
1 2
4
5
6
7
8
Top Cover
1
3
8
Sub Chassis Unit
Fig. 1
3
2
2
1
CB5
CB205
CB203
Plate Side R
6