Disassembly Procedures - Yamaha RX-V100D Service Manual

RX-V100D
I DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws (1), 4 screws (2) and 1 screws (3). (Fig. 1)
b. Slide the Top Cover rearward to remove it. (Fig. 1)
2. Removal of Front Panel Unit
a. Remove 2 Knobs. (Fig. 1)
b. Remove 1 screw (4) and then remove the Support Top. (Fig. 1)
c. Remove 6 screws (5) and then remove the Front Panel Unit. (Fig. 1)
3. Removal of Plate Side
a. Remove 2 push rivets (6). (Fig. 1)
b. Remove the Plate Side L/R. (Fig. 1)
4. Removal of Sub Chassis Unit
a. Remove 2 screws (7) and then slide the Sub Chassis Unit forward. (Fig. 1)
b. Loosen the harness fixture fixing the cable.
c. Remove CB306, CB309, CB456 and CB863 and then remove the Sub Chassis Unit. (Fig. 1)
2
Top Cover
2
1
3
Sub Chassis Unit
Plate Side L
Suport Top
1
CB456
CB863
6
5
4
7
CB306
CB309
5
7
Plate Side R
Knob
6
Front Panel Unit
Fig. 1
8