Troubleshooting; Replacing The Ink Ribbon And Paper - Sony UP-DR80 Quick Manual

UP-DR80 Quick Guide
Removing Scraps
1
Scrap receptacle
Paper cover

Replacing the Ink Ribbon and Paper

1
Media tray
5
Blue
Paper holder
Label
Paper holder
Notes
• When loading the ink ribbon and paper, remove the media tray from the printer. (Fig.
• When replacing an ink ribbon,
• When transporting the printer, be sure to remove the paper scraps, paper, ink ribbon, and paper holders beforehand.
• Do not open the media tray and paper cover while printing is in progress or while the printer indicators are blinking.
• Do not lift the printer by the paper outlet.

Troubleshooting

• All of the indicators are lit and printing is disabled.
‚
Turn off the printer, and turn it on again.
• If the ALARM indicator is lit:
‚ Make sure that the colors of the paper holders and the colored label on the paper match. (Fig.
‚
Make sure that the selector on the paper holder matches the paper size.
‚
Make sure that the label on the paper has been removed. (Fig.
‚
Remove any printouts that have accumulated on the paper cover.
• If the CLEANING and ALARM indicators are lit:
‚
Remove any paper scraps that have accumulated in the scrap receptacle. (See "Removing Scraps")
 If a problem persists, refer to the operating instructions.
2
2
Scrap receptacle
Scraps
2
6
Pink
Blue
replace both the ink ribbon and the paper.
3
3
7
Pink
)
4
IC board
8
)
)
English