Specifications; Standard Accessories; Battery Removal/Installation - Hitachi DS 14DFL Handling Instructions Manual

10. Do not use in a location where strong static electricity
generates.
11. If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears abnormal
during use, recharging or storage, immediately remove it
from the equipment or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your eyes, do not
rub your eyes and wash them well with fresh clean water
such as tap water and contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.

SPECIFICATIONS

POWER TOOL
Model
No-load speed (Low/High)
Wood
(Thickness 18 mm)
Drilling
Metal
(Thickness 1.6 mm)
Capacity
Machine screw
Driving
Wood screw
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

1 Plus driver bit (No. 2 × 65L) ................... 1
DS14DFL
2 Charger (UC18YGL2) ............................ 1
DS18DFL
3 Plastic case ........................................... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BCL1415) (For DS14DFL)
0 – 400 / 0 – 1200 /min
Steel: 12 mm
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
BCL1415: Li-ion 14.4 V (1.5 Ah 4 cells) BCL1815: Li-ion 18 V (1.5 Ah 5 cells)
UC18YGL2
7.2 – 18 V
0.4 kg
2. If liquid leaks onto your skin or clothes, wash well with
clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you fi nd rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using the
battery for the fi rst time, do not use and return it to your
supplier or vendor.
DS14DFL
30 mm
6 mm
1.6 kg
2. Battery (BCL1815) (For DS18DFL)
Optional accessories are subject to change without notice.
APPLICATIONS
○ Driving and removing of machine screws, wood screws,
tapping screws, etc.
○ Drilling of various woods.
○ Drilling of various metals.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
DS18DFL
0 – 400 / 0 – 1200 /min
38 mm
Steel: 13 mm
6 mm
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
1.7 kg
15