Saeco Intuita HD8750 User Manual page 42

ENGLISH
40
3
Remove the "INTENZA+" water fi lter (if supplied) from the water tank if
it was installed.
4
Remove the water tank and pour in the entire contents of the Saeco
descaling solution. Fill the water tank with fresh water up to the MAX
level.
5 Place the water tank back into the machine.
6 Place a large container (1.5l) under the steam/hot water wand and the
dispensing spout.
7 Press and hold the "
starts blinking, release it to start the cycle. The "
during the whole descaling cycle.
Note:
If the " " button is pressed by mistake, press the "
8 The steam/hot water wand ("
dispensing spout ("
the descaling solution.
" button for 3 seconds. When the button
" button permanently on) and the
" button permanently on) now start dispensing
" button blinks
" button to quit.