Saeco Intuita HD8750 User Manual page 18

ENGLISH
16
2
Remove the "INTENZA+" water fi lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.
3 Set the fi lter according to the water hardness in your area. The settings
can be found on the fi lter packaging.
A = Soft water
B = Hard water (standard)
C = Very hard water
4
Insert the fi lter into the empty water tank. Press it down until it cannot
move any further.
5 Fill the water tank with fresh water and reinsert it into the machine.
Write down the date of the next water fi lter replacement (+ 2 months).
6 Dispense all the water in the tank by using the hot water function (see
"Hot Water Dispensing" chapter).
7 Fill the water tank again.