Table of Contents
Advertisement
Cables and Connectors
This appendix lists cables that have been tested and verified for use with the
HP AdvanceStack Hub-16U. It also includes minimum pin-out information
so, if you wish to use an unlisted cable, you can verify that the cables used in
your installation are correctly wired. Note that each pin-out does not
necessarily match the pin-out for the corresponding HP cable, but cables
manufactured to follow the minimum pin-out will function correctly.
Incorrectly wired cabling is the most common cause of problems for LAN
communications. HP recommends that you work with a qualified LAN cable
installer for assistance with your cabling requirements.
Recommended Cables
Network connections to the hub:
Hub to end node
connection or hub to
hub connection
using the MDI/MDI-X
switch
* The maximum total length of any twisted-pair segment is 100 meters.
You can contact your HP authorized dealer or call HP at 1-800-538-8787 to
order these parts.
A-2
Cable Function
Cable Type
Twisted-pair
"straight-through"
cable
HP Product Number
92268A (4 pair, 4 meters)
92268B (4 pair, 8 meters)
92268C (4 pair, 16 meters)
92268D (4 pair, 32 meters)
92268N (4 pair, 300 meters)*
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
