NightWatcher nw1010X Installation & Operating Manual page 5

Motion tracking sensor halogen light/ alarm plus
Table of Contents

Advertisement

FUNCTION
This light is equipped with 3 motion sensors: zone 1 covers 60 degree, zone 2 covers 100 degrees and zone 3
covers 60 degrees. 220 degrees (maximum) in total for 3 zones.
ZONE 1
When power is first turned on the light will go to self calibration mode for about 1 minute.
During calibration mode the light will switch on for 1 minute to test bulb activity.
If calibration was done during day time - the light will automatically go to stand by mode until dusk.
If calibration was done during night time - the light will resume normal operation.
The factory default setting is:
- Night Mode - the light will turn on for 3 minutes when heat / movement are detected. Steady red LED
through the front lens of the housing indicates system active.
To change detection / light activity to
- ALL Day Mode - push the button at the bottom of the housing.
Push-button programmable functions:
- Night time mode: light works at night only and alarm works on day and night
(factory setting)
- All day mode: light and alarm work on day and night
Reset function: If the stepper motor of tracking light works abnormally,
the hidden LED indicator will flash in red and the light will stop turning
automatically. In All Day Mode, the red light will flash on and off for 5
seconds; in Night Mode, the red light will flash in regular patterns.
Simply switch off and on at the main power supply to reset the
tracking light operation. Below are the possible abnormal situations.
- External force: the light head is blocked by objects or is blown by strong
wind and is unable to turn properly, the hidden LED will flash in red to
signal users the abnormal situation.
- Stepper motor: when stepper motor is out of synchronization, malfunction
or damaged, the hidden LED will flash in red to signal users the abnormal
situation. Switch off and on at the main power supply. If the stepper motor
stops working, the tracking light becomes a regular motion sensor security light.
ZONE 2
TOTAL DETECTION RANGE
ZONE 3
Push-button
Left 70° ° ° °
Hidden LED
Right 70° ° ° °
5

Advertisement

Table of Contents
loading

Table of Contents