Table of Contents
Advertisement
INTRODUCTION
Congratulations on the purchase of your new Nightwatcher Alarm Plus. Before installation of the
unit, please read the operating instructions and safeguards carefully. It is important that you read
and follow the instructions in the manual, even if you feel you are familiar with this type of
product.
Please retain the instructions in a safe place for future reference
SPECIFICATIONS
IMPORTANT SAFEGUARDS
WHEN USING ELECTRICAL APPLIANCES, IN ORDER TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, AND/OR INJURY, THESE BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED:
FOR YOUR SAFETY
Read all instructions carefully, even if you feel you are quite familiar with the appliance.
Any alterations or additions to building wiring, must be completed by a licensed electrical
•
mechanic, or person authorised by legislation to work on the fixed wiring of any electrical
installation
To prevent electric shock, please ensure that power is disconnected before installing.
•
The appliance is not intended for use by children or infirm persons without supervision.
•
Children should be supervised to ensure that they do not play with the appliance.
•
This unit must be connected to a 220-240V 50Hz power source
•
The lamp must be earthed
•
The cable installed shall be 3 x 1.0mm² at least
•
The unit is for outdoor use only
•
The unit is for wall mounting
•
COMPULSORY WARNING
Note: No user serviceable parts inside. The Halogen Lamp is the only part that can be replaced.
Unauthorised modification voids warranty, Return to place of purchase for replacement or service under
warranty.
SAVE THESE INSTRUCTIONS
Model Number: NW1010x
AC Input: 220-240V 50Hz
Time Adjustment: Fixed at 3 Minutes
Sensor Range: 10m x 210°
Power Consumption: 150Watts
IP Weather Rating: IP54
Lamp: 150W, J type Halogen Lamp
2
Advertisement
Table of Contents
