IBM TotalStorage DS300 Quick Installation Manual page 5

Hide thumbs Also See for TotalStorage DS300:

6. For a TotalStorage DS400, continue to step 7; otherwise, select the authentication options for the

logical drive.

7. Complete the following steps to configure the access control list for the logical drive (see the

"Defining initiator information" section in the ServeRAID Manager online help for more information):

a. Select Add or Discover new initiators (DS400 only). A window opens containing the first entry in

the access control list.

b. In the top line in the window, type or select from the menu (if Discover new initiators is selected)

one of the following choices:

v The world wide port name (WWPN) for the Fibre Channel host bus adapter (HBA) that the

logical unit number (LUN) will be bound to

v The iSCSI Qualified Name (IQN) for the iSCSI initiator

c. In the second line in the window, type the alias that you want to use for the entity in the top line.

d. Click OK to accept the information that you entered. A new access-list-entry window opens.

Repeat steps 7b through 7d for each entry in the access list. When you are finished, click Cancel.

8. Click Next. The mapping pane is displayed. The aliases in the access control list are displayed in tabs

in the right pane; the logical drives are displayed in the left pane.

9. Complete the following steps to associate one or more logical drives with an alias (see the "Assigning

logical drives to initiators" section in the ServeRAID Manager online help for more information):

a. Highlight the logical drive.

b. Click the alias that you want to associate it with.

c. Click the single arrow in the middle pane to move the drive to the alias, or click the double arrow

in the middle pane to move all the drives to the alias. The drive moves to a point beneath the alias

in the right pane.

d. Click Next.

e. Click Accept to apply the changes, or click Back to return to the mapping pane to make changes

or to make more associations.

After you complete the associations, the Enclosure View pane is displayed again, and the LUN is

ready for access.

Totalstorage ds400