Table of Contents
Advertisement
Door Stop
Screw
Top
Bottom
Hinge
Hinge
Center
Screw
Screw
Hinge
Screw
Screws
Cabinet
Hole Plugs
Hinge
Hole Plug
Door Stop
Screw
Shim
Hinge
Hole Plug
DOOR REMOVAL / REVERSAL INSTRUCTIONS
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
N O T E
N O T E
N O T E
N O T E
N O T E
The direction in which your beverage center doors open (door swing) can be
reversed, from left to right or right to left, by moving the door hinges from one
side to the other. Reversing the door swing should be performed by a
Top Hinge
qualified person.
IMPOR
IMPOR
IMPORT T T T T ANT
IMPOR
IMPOR
Before you begin, turn the beverage center temperature control to "0" and
remove the electrical power cord from the wall outlet. Remove any food from
door shelves.
1.
Remove toe grille.
2.
Remove top hinge with 3/8" hex driver and lift freezer door off of center
Door
Stop
hinge pin. Set door aside.
3.
Unscrew center hinge pin using adjustable wrench and save for
Washer
reassembly. Ensure plastic washer stays on hinge pin.
Hinge Pin
4.
Lift refrigerator door off of bottom hinge and set aside.
Center
5.
Remove center hinge and shim by removing inside screw and
Hinge
loosening two outside screws enough to allow hinge and shim to slide out.
Tighten screws.
6.
Loosen two outside screws on opposite side of refrigerator, remove inside
Screws
screw and install center hinge.
Handle
Hole Plugs
7.
Remove two screws on bottom hinge with 3/8" socket wrench.
8.
Install bottom hinge on opposite side with the two screws removed from
step 7.
9.
Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to
other hole in hinge and tighten with adjustable wrench.
10. Move beverage center door stops to opposite side. Before starting screws,
use an awl to puncture the foam.
11. Position beverage center door onto bottom hinge pin and screw center
hinge pin through center hinge into top of door. Close beverage center
door to help align hinge hole.
12. Tighten center hinge pin with adjustable wrench.
13. Remove cabinet and hinge hole plugs and move to opposite side.
14. Lower freezer door onto center hinge pin.
15. Close freezer door. Have an assistant lift up on opposite side of door while
tightening screws to install top hinge.
16. Replace toe grille.
17. Plug in electrical power cord and turn beverage center temperature
control to the "5" position. Adjust setting as necessary.
ANT
ANT
ANT
ANT
9
Advertisement
Table of Contents
