Warranty - Sani king PERFORM-MAX 910 Instruction Manual

Limited One-Year Warranty
King Technology will warrant this unit with a complete
replacement for the original purchaser should it prove
defective by reason of improper workmanship and/or
material, for a period of one (1) year from the date of
original purchase. King Technology holds the option
of replacing any defective part without charge if it is
determined to be all that is needed to correct any
situation that may arise. Parts used for replacement
are warranted for the remainder of the original

warranty.

1. To obtain warranty service, you must deliver
product to King Technology or its nearest authorized
dealer. Shipping expense are the purchaser's
responsibility. The name of the nearest authorized
dealer can be obtained by writing or calling King
Technology at the address and telephone number
provided below. Proof of purchase is required when
requesting warranty service. Purchaser must present
the sales receipt or other document which
establishes proof of purchase. To validate your
warranty, complete the warranty card that came
with your unit and return it to King Technology
within 30 days of purchase and installation.
2. This warranty does not cover defects caused by:
Modification, alteration, repair or service of the
product contrary to the accompanying instructions;
physical abuse to or misuse of the product or
operation or installation in a manner contrary to
the accompanying instructions. This warranty also
excludes all costs arising from the warranty also
excludes any and all claims arising out of the
chemicals used in the product or their characteristics.
3. CAUTION - Read carefully - Do not add shock in or
near skimmer.
A. This unit is not designed for shock treatment
of spas or pools. See your spa or pool dealer or
Manufactured by: KING TECHNOLOGY, INC.
530 11th Avenue South, Hopkins, MN 55343 U.S.A. (952) 933-6118 FAX (952) 933-2206
www.kingtechnology.com
distributor for further information concerning shock
treatments.
B. Control dial settings in excess of the recom-
mended setting levels for trichlor or bromine can
result in excess sanitizers being discharged into our
spa or pool. This can result in bleaching or discolor-
ation of areas around the spa or pool inlet or in
some cases bleaching or discoloration of the entire
spa or pool liner or paint.
C. Excess trichlor or bromine in the spa or pool
can create health hazards to bathers. Consult each
chemical manufacturer's warnings and cautions for
specifics.
4. Any express warranty not provided for herein, and
any remedy for breach of warranty or breach of
contract which, but for this provision, might arise by
implication or operation of law, is hereby expressly
excluded and disclaimed. Any express warranty not
provided herein, and any remedy for breach of con-
tract but which for this provision might arise by impli-
cation or operation of law is hereby excluded and
disclaimed. The implied warranties of merchantability
and of fitness for any particular purpose are expressly
limited to a term of one year. Some states do not allow
limitation on how long an implies warranty lasts, so
the above limitation may not apply to you.
5. Under no circumstance shall King Technology be
liable to purchaser or any other person for any
damage or loss incurred because of any chemicals
used in the product or their physical characteristics,
or interruption of service of the product, or any
special, incidental or consequential damages or losses,
whether arising out of breach of warranty, breach
of contract or otherwise. Some states do not allow
the exclusion or limitation of incidental consequential
damages, so the above limitation or exclusion may
not apply to you.
Made in U.S.A.
Patent #4662387
U.S. Patents Pending
Foreign Patents Pending
PN #20-48-0115
PMAXMAN 55310043