Advertisement
10
2. Securely affix honeycomb grid to flash
head with fabric fasteners and
ensure device is securely attached.
Notes:
You may remove fabric fastener strip
attached to honeycomb device and
reposition it for a better fit.
|
FD-700
LIGHT SHAPERS
Benefits:
•
White side of reflector acts as bounce card.
•
Black side blocks light from flaring
and hitting subject
•
Two light shaper devices can
serve as barn door setup
•
Fits nearly any portable flash
Instructions:
1. Attach adhesive-backed fabric fasteners
to top and sides of flash head; two light
shaper devices can be used in tandem to
act as a barn door setup.
2. For use as a bounce card, allow the
white side of reflector to face toward
flash head and affix to fastener.
3. For use as a light blocker, position
the black side of reflector along any
side of flash head and affix to fastener.
Advertisement
