Teletext Adjustments - Bang & Olufsen BeoCenter 6 – 26 Service Manual

TELETEXT ADJUSTMENTS Sub Menu
Some TV broadcasters transmit a picture format identification, enabling the TV to
switch to the proper format automatically when WSS DETECT is ON if there is WSS
codes in the signal.
BROADCAST ONLY: Only switching on signal from the TV tuner.
DETECT ON: Switching on signals from all sources TV tuner, DVD playback, and AV
sockets.
DETECT OFF: Used under certain conditions, e.g. a poor signal-to-noise ratio, the
detection may fail, which may entail faulty swithing.
The following adjustments can be made:
WSS STATUS
TEXT LANGUAGE:
B&O LANGUAGE 0
AUTO FORMAT
4:3
Selecting "B&O LANGUAGE" makes it possible to choose among 7 different
teletext character sets.
0 English, German, Swedish, Italian, French, Portuguese, Slovak
 Polish, German, Swedish, Italian, French, Croatian, Slovak, Rumanian
2 English, German, Swedish, Italian, French, Portuguese, Turkish
3 English, Russian, Estonian, Czech, German, Lithuanian, Ukrainian
4 English, German, Swedish, Italian, French, Portuguese, Turkish, Greek
5 English, Arabic, French
6 English, Hebrew, Arabic
If language 3 to 6 are choosen it is not possible to receive teletext level 2.5 d/r/c/s
characters. If language 3 to 6 are choosen it is not possible to make animation in
the programme list in teletext mode.
If auto format is enabled the picture is automatically adjusted to the best picture
format - automatic picture format optimization (Black Bar Detection). If the
function is disabled the format optimization must be done manually with Beo4.
When the 4:3 function is set to ON it is possible to use the 4:3 format in ´Format´.
DETECT ON / OFF / BROADCAST ONLY
0-6
ENABLED / DISABLED
ON/OFF
Service mode 4.9