Service Mode In General; Access To Service Menu; Deactivating Service Mode - Bang & Olufsen BeoCenter 6 – 26 Service Manual

Service mode in general

Access to service menu

Deactivating service mode

Option programming
The Menu Overview appendix provides an overview of the menus as they appear
in the Software. The menu items are generally self-explanatory so you can gain a
general overview by studying this page closely. In addition to the menus, there is a
little extra functionality that comes under service mode, which is described in the
following subsections.
The service menu must be activated while the setup menu is displayed. From this
initial state, the service menu is activated in one of the following ways:
- Beo4: the service menu is activated by pressing 0 0 GO within 3 s.
- On the device: if the device is switched on, activation of the service switch (ignore
mode switch) will cause the service menu to be displayed.
When you exit the service menu (standard menu operation), the device is normal.
You cannot exit ignore mode until the device is switched off.
Option programming can only be carried out using a Beo4.
Option Device
0 BC, BV, MX4200, MX8000, BV6, BV3, BV7, BC6
The IR receiver of the TV is disconnected.
 BC, BV, MX4200, MX8000, BV6, BV3, BV7, BC6
The TV and the Audio system (BeoLink system) are placed in the same
room.
2 BC, BV, MX4200, MX8000, BV6, BV3, BV7, BC6
The TV and the Audio system (BeoLink system) are placed in different
rooms.
3 -
4 BC, BV, MX4200, MX8000, BV6, BV3, BV7, BC6
Two TV's in the same room and the TV's are not linked together.
5 BC, BV, MX4200, MX8000, BV6, BV3, BV7, BC6
The TV and the Audio system (BeoLink system) are placed in the same
link room.
6 BC, BV, MX4200, MX8000, BV6, BV3, BV7, BC6
The TV is the only product in the link room.
Service mode 4.3