Graphic Symbols - Lincoln Electric IDEALARC CV-300 Operator's Manual

B-4
J. WIRE FEEDER VOLTMETER SWITCH
-This switch selects the polarity of the wire
feeder voltmeter, if so equipped. When weld-
ing electrode positive (MIG, Outershield and
some Innershield processes) set the switch
to "+".
GRAPHIC SYMBOLS THAT APPEAR ON
REMOTE OUTPUT
VOLTAGE CONTROL
WARNING
OPERATION
THIS MACHINE OR IN THIS MANUAL
OFF
ON
AC
POWER
INDICATES WARNING INFORMATION
LOCATED ON RIGHT CASE SIDE
-When welding electrode negative (most
Innershield electrodes) set the switch to "-".
-This switch has no effect on the welding
polarity. In fact, if the wire feeder being used
does not have a voltmeter, the setting of this
switch has no effect.
THERMAL PROTEC-
TION INDICATOR
CLOCKWISE ROTA-
TION INCREASES
LOCAL OUTPUT
VOLTAGE CONTROL
CV-300
LIGHT
CIRCUIT
BREAKER
VOLTAGE
B-4