Download Print this page

Advertisement

Quick Links

EQ-AMP1500
1500W Power Amplifier
Instruction Manual
4091 AMTC Center Drive
Clearwater, FL 33764-6976
(727)531-3105
(727)531-3965
www.amtc.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the EQ-AMP1500 and is the answer not in the manual?

Questions and answers

Summary of Contents for AMTC EQ-AMP1500

  • Page 1 EQ-AMP1500 1500W Power Amplifier Instruction Manual   4091 AMTC Center Drive Clearwater, FL 33764-6976    (727)531-3105 (727)531-3965 www.amtc.com...
  • Page 2 Features 1. Rear-panel AUX input – XLR and ¼”/6.3mm 2. Line-level output allows connection to another amplifier - XLR and ¼”/6.3mm 3. 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant- resistance speaker output 4. Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume 5.
  • Page 3 Input Sensitivity/Impedance: 250 mV / 15k Ohms S/N: Better than 80 dB Frequency Response (+-3dB): 90 Hz - 20 kHz Net Weight: 68 lbs. (30.84 kg) Shipping Weight: 71.5 lbs. (32.43 kg) Dimensions: 19.02” (48.3 cm) W x 20.91” (53.1 cm) D x 5.2” (13.2 cm) H...
  • Page 4 Front Panel 1 2 3 4 5 Power Indicator LED Clipping Indicator LED (Indicates that input signal is excessive. Reduce input level.) Signal Indicator LED (Indicates that input signal is detected.) Protection Indicator LED (Indicates protection mode. Turn off amplifier, and check for short circuit in speaker wiring or excessive speaker load.) Temperature Indicator LED (Indicates that amplifier is overheating.
  • Page 5 Rear Panel XLR Input ¼”/6.3 mm Input ¼”/6.3 mm Line Level Output XLR Line Level Output 100V Speaker Output (select only one connection from 5, 6, and 7) 70V Speaker Output (select only one connection from 5, 6, and 7) 4-16 ohm Speaker Output (select only one connection from 5, 6, and 7) Common Speaker Output Fuse holder (use T25AL250V)
  • Page 6 Usage Notes 1. Do not power on the amplifier until all input sources and speakers are securely connected. Turn the volume knob to its minimum setting before powering on the amplifier to prevent speaker damage. 2. The total power consumption rating of the speakers must not exceed the amplifier’s continuous power rating.
  • Page 7 Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled into the unit enclosure through openings. Damage Requiring Service: The unit should be returned to AMTC when: The power supply cord or the plug has been damaged; or Objects have fallen, or liquid has spilled, into the unit;...
  • Page 8 Liability for any defect is limited to repair or replacement of this product at the option of AMTC. AMTC shall not be liable for damage to other products caused by defects in this...
  • Page 9 damages, whether incidental, consequential or otherwise. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, go the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

This manual is also suitable for:

Eq-amp500