Related Manuals for AMTC EQ-AMP4X6
Summary of Contents for AMTC EQ-AMP4X6
- Page 1 EQ-AMP4X6 4x60W Power Amplifier Instruction Manual 4091 AMTC Center Drive Clearwater, FL 33764-6976 (727)531-3105 (727)531-3965 www.amtc.com...
- Page 2 Features 1. Four independent amplifiers in a single chassis, each with its own line-level input 2. 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant- resistance speaker output 3. Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume 4.
- Page 3 Tone Control (Bass: 100 Hz, Treble: 10 kHz): +-10 dB Net Weight: 38.7 lbs. (17.55 kg) Shipping Weight: 42 lbs. (19.05 kg) Dimensions: 19.05” (48.4 cm) W x 18.90” (48 cm) D x 3.46” (8.8 cm) H...
- Page 4 Front Panel 5 6 7 Power Indicator LED Startup Indicator LED Power Switch Channel Input Level Control Knobs Protection Indicator LEDs (Indicate protection mode. Turn off amplifier, and check for short circuit in speaker wiring or excessive speaker load.) Signal Indicator LEDs (Indicates that input signal is detected.) Clipping Indicator LEDs (Indicates that input signal is excessive.
- Page 5 Rear Panel Common Speaker Output 4-16 ohm Speaker Output (select only one connection from 2, 3, and 4) 70V Speaker Output (select only one connection from 2, 3, and 4) 100V Speaker Output (select only one connection from 2, 3, and 4) Line Level Inputs (1/4”/6.3mm) Fuse (Use Type T12A 5x20mm 100-120 VAC / 60 Hz VAC Power Input...
- Page 6 Usage Notes 1. Do not power on the amplifier until all input sources and speakers are securely connected. Turn the volume knob to its minimum setting before powering on the amplifier to prevent speaker damage. 2. The total power consumption rating of the speakers must not exceed the amplifier’s continuous power rating.
- Page 7 Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled into the unit enclosure through openings. Damage Requiring Service: The unit should be returned to AMTC when: The power supply cord or the plug has been damaged; or Objects have fallen, or liquid has spilled, into the unit;...
- Page 8 Liability for any defect is limited to repair or replacement of this product at the option of AMTC. AMTC shall not be liable for damage to other products caused by defects in this...
- Page 9 damages, whether incidental, consequential or otherwise. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, go the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Need help?
Do you have a question about the EQ-AMP4X6 and is the answer not in the manual?
Questions and answers