Clarke Focus S28 WB Operator's Manual page 64

Figure #29
Figure #30
Figure #31
Page -64-
MAINTENANCE
Adjusting Squeegee Blades
When properly installed the front blade should be ap-
proximately .06 above the rear blade. See figure #29.
Adjusting Squeegee Support Wheels:
The support wheels should be set at .12 above the floor
with the rear blade touching the floor. See figure #31.
WARNING: Maintenance and repairs
.12
WARNING: Electrical repairs must be
Consult your Clarke Authorized Service Person to
do the service procedures.
Use only genuine Clarke parts.
How to Clean the Solution Line
If the solution line becomes clogged, pull the filter
assembly out from behind the brush housing (Figure
#30 and remove the filter screen (Figure # 31) and
clean or replace it. Push filter assembly back inside
frame.
®
Clarke
Operator's Manual - FOCUS S28/L28/S33/L33/S38/L38 WB
EN
must be done by author-
ized personnel only .
done by authorized per-
sonnel only.