Installing Drivers And Utilities - Toshiba e-Studio 224cs User Manual

I
NSTALLING DRIVERS AND UTILITIES
NOTE
Example screenshots have been used throughout and may not represent your
machine, however the procedure is the same.
NOTE
You must be logged on as an administrator or a member of the Administrators
group in order to complete this procedure. If your computer is connected to a
network, network policy settings may also prevent you from completing this
procedure.
The installation instructions below refer to USB connection. For network connection details
refer to the Configuration Guide.
If you are running Windows Server 2003 or Server 2008, you may need to follow these
steps to ensure the WIA service starts when using the scanner driver and ActKey Utility:
NOTE
In the case of Server 2008, Desktop Experience needs to be installed.
1. Click Start > Administrative Tools > Services.
2. Double-click Services.
3. Double-click Windows Image Acquisition (WIA).
4. From the Startup type menu, select Automatic.
5. Under Service status, click Start.
6. Click OK.
Getting started > 26