Toshiba e-Studio 224cs User Manual page 181

ITEM OPTION
Management System Setup
(cont.) (cont.)
Power Save
Memory Setup
Flash Memory
Setup
SD Memory
Card Setup
Unit Of Measure
Date Format
Allow All Reports To Print
Near Life LED
Status In Near Life
Address Information
Lock Time Out
USB Memory Interface
Panel Contrast
Power Save Time
Sleep Time
Auto Power Off Time
Silent Mode
ECO Mode
Receive Buffer Size
Resource Save
Initialize
Initialize
Format Partition
Appendix A - menu system > 181
DEFAULT VALUE/DESCRIPTION
Millimeter Select unit of
measure.
dd/mm/yyyy Select desired date
format.
Disable Enable/disable report
printing.
Disable Enable/disable near
life LED.
Disable Enable: Display a
near-life warning.
Disable: Do not display a
near-life warning.
3 minute(s) Enter time-out
duration.
Enable Select disable to turn
off scan to USB
function.
0 Adjust the LCD panel
contrast.
1 minute Select desired time
interval before
machine enters power
save mode.
30 minutes Select desired time
interval before machine
enters sleep mode.
4 hours Select desired time
interval to turn off the
machine's power
automatically.
ON Enable/disable silent
mode.
ON When ON, if the
machine is in power
save mode and you
send a small print job
(1 or 2 pages), the
machine will print the
job without warming
the fuser to the
"normal" operating
temperature
beforehand.
Auto Specify the size of the
buffer you want to use
to receive data.
OFF Specify the size of the
buffer you want to use
for resource saving.
Execute
Execute
PCL
Common
PS