Toshiba e-Studio 224cs User Manual page 93

FEATURE OPTION
Fax Functions TTI
(cont.)
TTI Select
Transmit
Confirmation
Report
Delayed Tx
Fcode Polling
Fcode Tx
Memory Tx
Fax Job View/
Cancel
Fax History Tx History
Rx History
Manual feed
If you wish to send multiple sets of documents from the ADF or flatbed, enable the
"continuous scan" feature. Refer to
ON, OFF
user defined
ON, OFF
OFF
Date
Time
ON, OFF
ON, OFF
ON, OFF
"Continuous scan mode" on page 113
Faxing - e-STUDIO264CS only > 93
DESCRIPTION
Prints the sender name on the header of the
transmitted fax. By default, the name you
specified in Sender ID is printed. Refer to
"Sender ID" on page 162.
Select the user defined TTI header.
Note: TTI must be ON.
Select ON to print a fax confirmation after
transmission.
Delayed transmission allows you to fax
documents at a specific date and time.
Up to one hundred transmission times can be
scheduled up to one month in advance.
To turn ON, use the numeric keypad to enter
the sub-address of the remote machine.
If required, use the numeric keypad to enter
the password of the remote machine.
F Code transmission is a function to
communicate using sub addresses or
passwords in accordance with the standard of
ITU-T. by creating and registering F Code
boxes you can execute confidential
communication and notice board
communication.
Use the numeric keypad to enter the sub-
address.
If required, use the numeric keypad to enter
the password of the remote machine.
Note: up to 20 F code boxes can be
registered, Up to 30 documents can be stored
in one box.
Note: Polling and FPolling must be OFF.
Select OFF to enable real time transmission,
i.e. fax transmission synchronisation with
scanning.
View or cancel a reserved fax job from the
list.
Check the transmission or reception history
and results of a fax job.
for full details.