Display Settings; Sound Settings - Panasonic CQ-VD7001U Operating Instructions Manual

■

Display Settings

The brightness of the
screen is not stable.
The picture is dark.
The picture is whitish.
Something is wrong
with the picture. The
picture is light in color.
The display does not
go back into the unit.
Red, blue, or green
spots appears.
■
Remote control unit
No response to press-
ing buttons
■

Sound settings

No sound from left,
right, front, or rear
speaker.
Left and right sounds
are reversed.
No sound on the
speaker.
No sound from the
subwoofer
AUTO (AUTO) dimmer is selected.
aSelect one of the dimmer levels from among 1 to 4 to make the dimmer
adjustment become free from light intensity.
The screen is not adjusted properly.
aMake every adjustment of the screen.
The monitor stops on the way to the home position.
a
Press [O/C] (OPEN/CLOSE).
This is a characteristic of liquid crystal panels and is not a problem.
The battery is inserted in the wrong direction. A wrong battery is inserted.
aInsert a correct battery in the correct direction.
The battery is weak.
aReplace the battery with new one.
The aiming direction of the remote control unit is wrong.
aAim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be
operable when the sensor is exposed to direct sunlight. In such a case, the
system is not faulty.)
aBlock off sunlight to the sensor.
Cables are not correctly connected.
aConnect the cables correctly.
The speaker leads are connected in reverse between right and left.
aConnect the speaker wires to the correct one.
The speaker setting is (no) or
NO
aSet it correctly.
Playing back a disc having a subwoofer channel
¡Subwoofer is set to
(no) in the speaker setting.
NO
aSet subwoofer to (yes).
YES
¡Down mix
aNo technical trouble. Cancel the down mix.
¡Private mode is set to
ON
aSet private mode to
OFF
¡Pro Logic is set to (on).
ON
aSet Pro Logic to (off).
OFF
(none) .
NONE
(on).
(off).
54
55
CQ-VD7001U