Before Disc Playback - Panasonic CQ-VD7001U Operating Instructions Manual

Before Disc Playback

❒ Disc Type
19
DISC DVD
Mark/logo
Disc Size
Video
NTSC
Format
LPCM,
MPEG1,
Audio
MPEG2,
Format
dts, Dolby
Digital
Region 1
No. ALL
Note:
¡About CD-Rs and CD-RWs, refer to "Notes on CD-
Rs/RWs". (a page 58)
¡Some copy-protected music CDs are not playable.
¡Even if you play a dts DVD or a dts CD, analog sound can-
not be reproduced. (Only digital output comes out)
❒ Notes on DVD-Rs/RWs
¡ Only video formatted discs are playable. Discs in the
video recording (VR) format are unplayable.
¡ Unfinalized discs are unplayable.
¡ Some discs are unplayable depending on the disc itself,
device, drive and software that are used for disc record-
ing.
❒ Discs not supported
The following discs are not played back on this prod-
uct.
DVD-Audio
¡
DVD+R
¡
SVCD
¡
¡ CD-G
CD-RW (except MP3 and CD-DA)
¡
CD-R (except MP3 and CD-DA)
¡
SACD
¡
Hybrid SACD (except CD-DA)
¡
Divx Video Discs
¡
CD-EXTRA (audio-only playback possible)
¡
DVDs with a region number other than "1" or "ALL"
¡
20
CQ-VD7001U
Discs that can be Played Back
VCD
CD CD-R/RW
(Video CD)
Recordable
ReWritable
TEXT
12 cm {5"}
LPCM LPCM
LPCM,
(CD-DA), (CD-DA),
MPEG1
dts MP3/WMA
DVD-ROM DVD-RAM
¡ ¡
DVD+RW
¡
VSD CVD
¡ ¡
¡ CD-ROM (except MP3)
Photo CD CDV
¡ ¡
Playing back a photo CD disc with this unit could
¡
damage the data that is recorded on the disc.
❒ Symbols used on jackets
(Examples of such symbols include)
2 : Number of subtitle languages
¡
: Number of audio tracks
¡
2
: Number of angles
¡
3
The numbers indicate the number of languages,
tracks, angles, etc., recorded on the disc.
Screen size (H:V aspect ratio)
: 4:3 standard size
¡
4 : 3
: Letterbox (a page 46)
¡
LB
16:9 wide size
¡
: Playback in letterbox format on a stan-
16 : 9
LB
dard screen (4:3).
16 : 9 : Playback in
PS
PAN & SCAN
(a page 46) format on a standard
screen (4:3).
Note:
¡ The size of the image that is displayed on the screen
depends on the screen mode ("Aspect Ratio"
50), and on the screen size for the content on the disc.
❒ Region Management Information
This product is designed and manufactured to
respond to the Region Management Information that
is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the
Region number of this product, this product does not
play the disc.
The Region number for this product is "1" and
"ALL".
Example:
1 2
1
ALL
4 6
(pan and scan)
page
a