Optical drive cable
Description
Optical drive cable (includes cable bracket)
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
Remove the optical drive cable:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the optical drive cable and cable bracket to the
base enclosure.
2.
Remove the cable bracket (2) and cable (3).
88
Chapter 4 Removal and replacement procedures
Battery on page
39), and then remove the following components:
WLAN module on page
Hard drive on page
53)
Keyboard on page
58)
Top cover on page
61)
Speakers on page
69)
USB board on page
71)
Power connector cable on page
Display assembly on page
System board on page
48)
73)
75)
84)
Spare part number
685084-001
ENWW