HP Compaq CQ58 Maintenance And Service Manual page 125

Country/region
The United States
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 0.75mm
wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be
used.
2. The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding
type with a NEMA 5-15P (15 A, 125 V ac) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL mark. UL file number must be
on each element.
3. The appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75mm
must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75mm
plug) must bear the CCC certification mark.
5.
The flexible cord must be Type H05VV-F 3X0.75mm
element. Corset approval number and logo must be printed on a flag label.
6.
The flexible cord must be Type HVCTF 3X1.25mm
plug) must bear the BSMI certification mark.
7. For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and CSA or C-
UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3X0.75/1.00mm
or ASTA marks.
ENWW
Accredited agency
UL
2 conductor size. Power cord set fittings (appliance coupler and
2 conductor size. Power cord set fittings (appliance coupler and wall
2 conductor size. KTL logo and individual approval number must be on each
2 conductor size. Power cord set fittings (appliance coupler, cable, and wall
Requirements for specific countries and regions 117
Applicable note number
2
2 or 1.25mm 2 conductor size. The wall plug
2 conductor size, with plug BS 1363/A with BSI