Hyundai HQL320WR Service Manual page 6

Circuit Service Methods
1.Color Adjustment
I Refer to adjustment specifications
for information on making adjustments
When Color adjustment has to
be adjusted during service
If the module is replaced or
changed Flash ROM(U33),
It must be readjusted using PC,
Include Color pattern
Color Adjust methode(power off state) (Color adjustment Pattern)
1) REMOCON:MUTE + 2 + 5 + 8 + POWER + OK
2) OSD B/D :VOLUME(DOWN)+ POWER(OSD B/D) + POWER(REMOCON) + OK
2.ENTERED INTO AGING MODE at TV Source
1) REMOCON:MUTE + 1 + 4 + 7 + POWER ;REMOVE-POWER OFF(OSD B/D)
2) OSD B/D :MENU + CH POWER(REMOCON) ;RESET-POWER OFF(OSD B/D)
3.CHECKING MCU VERSION
1) REMOCON:ADVANCED + DISPLAY-NTSC MODEL
2) REMOCON:ADVANCED + INFORMATION-PAL MODEL
4.SET INITIAL METHODE
1) REMOCON:MUTE + 3 + 2 + 1 + POWER
2) OSD B/D :MENU + CH POWER(REMOCON)
--5--