Table of Contents
Advertisement
17. IF STATUS (Input function status)
The status information is displayed in the hexadeci-
mal notation one after another by the sub-menu op-
eration.
For signal processing, the status before the sub-menu
operation is maintained.
* Mentioning the details is not allowed because this
menu is only for the use of development staff.
* The figures in the diagram are given as reference
only.
18. DSP BUS CHECK
This menu is used to self-diagnose whether or not the
bus connection for the TI (DA70Y) and the external
ROM/RAM is made properly.
NoEr:
No error detected.
Boot:
When "Boot" is displayed for a few seconds
or "Boot" and "NoEr" are displayed alter-
nately, there is possibility that an error oc-
curs.
19. RESERVED
20. PROTECTION HISTORY
Four protection histories are displayed.
Example /
20-1.DcPRT 000
History 1 /
21. RESERVED
DSP status
DST:3000020000
TI BUS:NoEr
Example /
20-2.P1PRT:061
History 2 /
Example /
20-4.NoPRT
History 4 /
RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863
Example /
20-3.TmPRT:000
History 3 /
61
Hide quick links:
Advertisement
Table of Contents
