Yamaha DSP-AX863SE Service Manual page 23

2. While pressing the "TONE CONTROL" key of this
unit, connect the power cable of this unit to the AC
outlet. (Fig. 2)
The FIRMWARE UPDATE mode is activated and
"CDDA Upgrader" is displayed. (Fig. 2)
3. Connect the power cable of DVD/CD player to the
AC outlet.
4. Press the "STANDBY/ON" key of the DVD/CD
player.
5. Press the "EJECT" key of the DVD/CD player to
open the disc tray.
6. Put the firmware CD on the disc tray and close the
disc tray.
7. Press the "PLAY" key of the DVD/CD player.
Then writing of the firmware is started. (Fig. 3)
8. When writing of the firmware is completed, "Up-
date Success", "Please..." and "Power off!!" are
displayed repeatedly. (Fig. 3)
Writing is started. /
Address:XXXXXX
XXXXXX: Address information of the received data /
RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863
"TONE CONTROL" key
CDDA Upgrader
Fig. 2
Writing is completed. /
Update Success
Please...
Power off!!
Fig. 3
23