Table of Contents
Advertisement
RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863
*
When the version of the firmware to be writ-
ten is the same as the one existing in this unit,
"Same Version", "Please..." and "Power off!!"
are displayed repeatedly. (Upgrading is not
necessary.)
If the display remains unchanged for more
than 10 seconds after starting the firmware
CD play procedure, perform the firmware CD
play procedure again from the beginning.
If "FILE CORRUPTED" is displayed after
"Address:XXXXXX", make sure that the writ-
ten data is not corrupted and perform Steps 1
to 8 of "Operation Procedures" again.
If "Upgrade Failed" is displayed, perform
Steps 1 to 8 of "Operation Procedures" again.
9. Press the "STOP" key of the DVD/CD player.
10. Press the "EJECT" key of the DVD/CD player to
open the disc tray.
11. Remove the firmware CD from the disc tray and
close the disc tray.
12. Turn off the power of the DVD/CD player and dis-
connect the power cable from the AC outlet.
13. Turn off the power by pressing the "MAIN ZONE ON/
OFF" (RX-V863 / HTR-6180: U, F models) /"STAND/
ON" (HTR-6180: C model / DSP-AX863SE) key of
this unit.
G Initializing of this unit
*
After updating the firmware, be sure to initialize
this unit.
1. Connect the power cable of this unit to the AC
outlet.
2. Press the "MAIN ZONE ON/OFF" (RX-V863 / HTR-
6180: U, F models) / "STANDBY/ON" (HTR-6180: C
model / DSP-AX863SE) key while simultaneously
pressing the "STRAIGHT" and "AUDIO SELECT"
keys. (Fig. 4)
Then the self-diagnostic function is activated.
3. Select the self-diagnostic function menu "23.
FACTORY PRESET".
4. Select the "PRESET RSRV".
"MAIN ZONE ON/OFF" key
(RX-V863 / HTR-6180: U, F models)
"STANDBY/ON" key
(HTR-6180: C model /
DSP-AX863SE / DSP-AX863)
PRESET INHIBIT (Initialization inhibited) /
23.PRESET INHI
24
"STRAIGHT" key
"AUDIO SELECT" key
Fig. 4
PRESET RESERVED (Initialization reserved) /
23.PRESET RSRV
Hide quick links:
Advertisement
Table of Contents
