Care And Maintenance; Error Indicators - Omron HBF-516 Instruction Manual

Karl Loren

Care and Maintenance

ERROR
DISPLAY
12/17/2013
Program Your Life

ERROR INDICATORS

CAUSE
Your palms or feet are not
positioned over the electrodes
correctly.
The measurement position was not
stable.
Your palms or feet were not placed
correctly.
Your palms or feet are too dry.
The Body Composition values are
outside the measurement range.
The monitor is not set up correctly.
You stepped onto the measurement
platform before 0.0 lb was
displayed.
The monitor was moved before
0.0 lb was displayed.
Movement during measurement.
Monitor detected weight over
330.0 lb.
www.karlfabrication.com
CORRECTION
Make sure you are barefoot.
Make sure your palms or the soles of your feet
are clean and dry.
Make sure your palms or feet are correctly
positioned.
Refer to CORRECT POSTURE FOR
MEASUREMENT on page 25 and How to
Hold the Grip Electrodes on page 26.
Remain still and do not move until the
measurement is complete.
Refer to CORRECT POSTURE FOR
MEASUREMENT on page 25 and How to
Hold the Grip Electrodes on page 26.
Slightly moisten your palms or the soles of
your feet with a damp towel and retake the
measurement.
• Check the settings entered for your personal
data. Change the settings if needed. Retake
the measurement.
• The main unit cannot measure body
composition outside its measurement range,
even if the age, gender and height settings are
correct. Refer to Display and Set Ranges on
page 42.
Remove the batteries. Wait one minute.
Reinstall the batteries. Refer to BATTERY
INSTALLATION on page 17.
Press the Power Switch and turn the monitor
on. Retake the measurement.
Wait until 0.0 lb is displayed before stepping
onto the measurement platform.
Do not move the monitor until 0.0 lb is
displayed.
Do not move until measurement is complete.
This monitor can only be used by people
weighing less than 330.0 lb.
37
37 of 44