Addressing - GE Security NX-1750 ProxPad Installation Manual

The ProxPad must be set to the correct address and partition number before it can be used on the system. The
following describes the procedure for viewing and modifying the address of a ProxPad:
•
•
•
•
•
•
•
The table below shows the addresses that will be set according to ProxPad number and partition
When the Program Mode is exited, the control panel automatically enrolls the devices.
The enrolling process takes about 12 seconds during which time a service message appears on the LCD display.
User codes are not accepted during the enrolling process. Once a module is enrolled and if not detected by the
control panel, a service condition (*2) will occur.
When a new reader is added to a system using already installed readers it will be updated with the card
information of the system by activating the card of an existing user. See Activating a User.
NX-1750 Installation manual

ADDRESSING

Enter Program Mode using the procedure outlined in the control panel Installation
Manual.
Present and hold a card at the ProxPad until a chime is heard. The "Fire" ICON and
"Armed" ICON will flash. The zone LED corresponding to the current ProxPad number will
also be illuminated.
Present a card briefly to advance the ProxPad number. If the ProxPad number is 8,
presenting a card briefly will reset the ProxPad number back to 1.
Continue presenting a card briefly until the desired ProxPad number is displayed.
Present and hold a card at the ProxPad until a chime is heard. The "Armed" ICON will stop
flashing and the "Ready" ICON will flash. The zone LED corresponding to the current
ProxPad partition will also be illuminated.
Present a card briefly as in steps 3 and 4 until the desired partition number is displayed.
Present and hold a card at the ProxPad until a chime is heard. The "Fire" ICON and the
"Ready" ICON will stop flashing and the display will return to normal operation.
ProxPad# Part1 Part2
1 192 193
2 200 201
3 208 209
4 216 217
5 224 225
6 232 233
7 240 241
8 248 249
Page 6
Part3 Part4 Part5 Part6
194 195 196 197
202 203 204 205
210 211 212 213
218 219 220 221
226 227 228 229
234 235 236 237
242 243 244 245
250 251 252 253
Part7 Part8
198 199
206 207
214 215
222 223
230 231
238 239
246 247
254 255
18/02/05