Adding Device; Perform Network Test - Danfoss Link FT Installation Manual

Installation Guide Danfoss Link™ FT

Adding device

Adding the Danfoss Link™ FT to a system is
GB
2.
made from the Danfoss Link™ CC Central
Controller .
devireg™550
When adding, press the install
button until the LED gives a
1.
fast green flash .
For further information,
Max. 1 m
see the Danfoss Link™ CC
instruction manual:
Configuration 6:
Adding devices.

Perform network test

When the Danfoss Link™ FT
2.
has been added to the Danfoss
Link™ CC Central Controller,
a network test should be
performed .
devireg™550
For more information on
network tests, see the Danfoss
Link™ CC instruction manual:
Configuration 8: Perform
network test .
1.
9
VISGZ45X © Danfoss 04/2011